Temperature sensor setup
07 Jan, 2014
The brewtroller can average two temperatures related to the mash tun – mash out and mash in – for more accurate mash temperature regulation via the HERMS coil.
07 Jan, 2014
The brewtroller can average two temperatures related to the mash tun – mash out and mash in – for more accurate mash temperature regulation via the HERMS coil.
03 Jan, 2014
Temperature sensors for HLT and mash tun out installed. PTFE tape needed…
15 Dec, 2013
Testing the temperature sensor. Not preheating the cup resulted in this cup of earl grey being brewed at a perilous 84C
15 Dec, 2013
Wiring up the valves. This was a tedious but necessary task.
14 Dec, 2013
Power! 3 in ( Aux, HLT1, HLT2), 3 out ( Pump, HLT1, HLT2)